 |
| Search: |
| | Shop Our Products: | | | 
| | |   | | House of Kolor SG100 Intercoat Klear Quart Size | INTERCOAT CLEAR (SG100)by House of Kolor is
A protective clear for artwork tape outs on SHIMRINŽBase Coats. May be used to blend SHIMRINŽ Pearl and Metallic Base Coats, to mix Pearl and Kandy Koncentrates, and to cut the SHIMRIN base for touchups and blends.
NOTE: Use only when top coating with urethane enamel
SG 100 intercoat clear mixes 2 parts clear to 1 part RU Reducer (RU310, RU311, RU312) and you can order them below.
Apply 1 or 2 medium coats of SG100 Intercoat Clear after the last coat of ShimrinŽ base has flashed dull, with 50% spray pattern overlap. Gun distance while spraying should be approximately 6 inches. Allow flash time between coats and approximately 1 hour before taping (tape time will vary with weather and shop conditions). In many instances SG100 may be taped in less than 30 minutes. Always allow flash time between coats.
SG100 FLASH TEST - SG100 WILL DRY TO A SEMI-GLOSS AND FEEL DRY TO THE TOUCH.
NOTE: DO NOT APPLY MORE THAN 4 COATS OF SG100. It is not designed for hi-build.
NOTE: If 4 hours of dry time has elapsed, scuff Intercoat Clear (PLEASE REFER TO SANDING GRIT RECOMMENDATIONS FOR SG100) to insure proper adhesion of topcoats. Do artwork with a minimum of tape contact and remove quickly for topcoats. Although we have let hours elapse on many jobs without a problem, common sense tells us that topcoats will merge better if the base is somewhat less than dry.
House of Kolor Intercoat Clear product data sheet in pdf format
| | You May Also Like | | | Also In This Category | |
| |
