 |
| Search: |
| | Shop Our Products: | | | 
| | |   | | Polyurethane Enamel Klear (UC35) by House of Kolor quart size | POLYURETHANE ENAMEL KLEAR may be used to topcoat any urethane or polyurethane enamels, and any SHIMRINŽ Base Coat color. It gives a high-gloss, has excellent weathering and UV resistance. This polyurethane enamel klear dries fast and hard, and can be colored sanded and buffed the next day. UC 35 Clearcoat mixes 2 parts Clear to 1 Part Hardner(KU150) and 1 part RU Reducer (RU310, RU311, RU312) and all can be ordered below. APPLYING Kosmic Klear (UC35)
Apply 2-3 medium wet coats with 50% pattern overlap. Gun distance while spraying should be approximately 6 inches. Allow flash time between coats.
URETHANE FLASH TEST - PAINT SHOULD BE STICKY AND NOT STRING WHEN TOUCHED AT THE WETTEST POINT BEFORE NEXT COAT IS APPLIED. (When using the flash test, always touch a new spot.) Monitor closely for maximum merging of coats.
NOTE: Waiting too long between coats can cause re-coat problems. If excessive dry time has elapsed and clear coat feels dry to the touch, allow 12 hours before sanding and re-coating to avoid lifting problems.
NOTE: Over spray from any catalyzed topcoat material (such as our UB04, UB05, UK Kandys, UC35 Klear or UFC19 Komply KlearŽ II may lift when base coats are applied. Mask carefully to prevent this over spray when painting door jambs, etc.
House of Kolor UC35 claearcoat product data sheet in pdf format
| | You May Also Like | | | Also In This Category | |
| |
