 |
| Search: |
| | Shop Our Products: | | | 
| | |   | | Urethane Flo-Klear 1.9 voc by House of Kolor UFC19 quart size | POLYURETHANE FLO-KLEAR is 33% solids as applied and buffs easily the next day. It meets the low VOC regulations and handles like conventional clear coats like UFC1. It gives a high gloss finish with excellent weathering and UV resistance. Mixes 2 parts clear to 1 part Catalyst (KU150) to 1 Part RU300 Reducer and can be ordered below. Apply one medium wet coat with 50% pattern overlap, wait approximately 5-10 minutes (do “URETHANE FLASH TEST” below). Follow with a full wet coat, wait approximately 10-15 minutes. Allow flash time between coats (do “URETHANE FLASH TEST” below). Apply a second wet coat. Gun distance while spraying should be approximately 6 inches.
URETHANE FLASH TEST - PAINT SHOULD BE STICKY AND NOT STRING WHEN TOUCHED AT THE WETTEST POINT BEFORE NEXT COAT IS APPLIED. (When using the flash test, always touch a new spot.) Monitor closely for maximum merging of coats. APPLYING KOMPLY KLEAR® II (continued)
Dry time between coats is approximately 10-20 minutes depending on shop conditions. High heat or high humidity conditions will accelerate cure time. Always check dry time using the string test.
CAUTION: Too long a wait between coats can cause wrinkling or lifting. Also too fast a re-coat can cause pinholes or solvent popping during cure. If excessive dry time has elapsed and clear coat feels dry to touch, allow 24 hours before sanding and re-coating to avoid lifting problems.
House of Kolor UFC Clearcoat product data sheet in pdf format
| | You May Also Like | | | Also In This Category | |
| |
