| Search: |
| | Shop Our Products: | | | 
| | |   | | Kandy Basecoat Shimrin ® KBC by House of Kolor (All Colors) quart size |
Kandy Base Coats by House of Kolor are a mixture of Kandy and select Pearls into a SHIMRIN® Universal Base Coat that mimics a Kandy finish. They feature low build, fewer coats, are easy to apply, and touchups are easier than ever. Due to their unique chemical make-up they may be top coated with either an acrylic lacquer or urethane enamel. May be reduced 50% with RU Series reducers (RU340, RU311, RU312) and you can order them below. Kandy basecoats come in many colors as fallows KBC01 Brandywine, KBC02 Lime Gold, KBC03 Cherry, KBC04 OR Blue, KBC05 Cobalt Blue, KB06 Burgandy, KBC07 Root Beer, KBC08 Tangerine, KBC09 OR Green, KBC10 Purple, KBC11 Apple Red, KBC12 PA Gold, KBC13 Burple, KBC14 SP Gold, KBC15 Teal, KBC16 Magenta, KBC17 Violette, KBC18 Pink, KBC19 Scarlet, KBC20Persimmon.APPLYING Shimrin® KANDY BASECOATS
After reducing, into the paint gun. Gun distance while spraying should be approximately 4 to 6 inches. Apply 3 to 4 medium coats with a 75% pattern overlap. Walk long objects. Avoid dry spraying, as loss of adhesion is possible. Again, medium coats work best. Allow flash time between coats
Allow dry time before Kandy or clear is applied (usually about 15 to 60 minutes and not longer than 4 hours). Topcoat within 4 hours or apply SG100 Intercoat Clear.
House of Kolor Kandy Basecoat product data sheet in pdf format
| | You May Also Like | | | Also In This Category | |
|  Reducer RU310-4 by House of Kolor "Fast Dry" quart sizeThis fast dry reducer is recommended for use with our Kosmic Kolor® Base Coats, Shimrin® Base Coats, Kandys, and Klears. Has staged release for proper flow out, leveling, and gloss retention. Reducers for Kosmic Kolor® Urethane Enamel & Shimrin® Universal Bases:
Our Kosmic Reducers - RU300 EXEMPT, RU310 FAST DRY, RU311 MEDIUM DRY, RU312 SLOW DRY, RU313 HIGH TEMP - are the only reducers we recommend for use with
our Kosmic Kolor® Urethane Enamel system. Used in the base, Kandy and clear coats, our reducers allow for:
• excellent sprayability • good flow out and leveling
• fast staged release • retention of gloss when dry
NOTE: Even with over reduction, the paint retains its gloss. Other reducers may cause dulling. This is especially true when any amount of over reduction has been attempted to
even metallics or increase flow out. Choice of reducer is dependent on three factors:
1. size of object being painted
2. shop temperature and humidity
3. air movement within the spray booth
House of Kolor Reducer product data sheet in pdf format
| | |  Reducer RU311-4 by House of Kolor "Medium dry" quart sizeThis medium dry reducer is recommended for use with our Kosmic Kolor® Base Coats, Shimrin® Base Coats, Kandys, and Klears. Has staged release for proper flow out, leveling, and gloss retention. Reducers for Kosmic Kolor® Urethane Enamel & Shimrin® Universal Bases:
Our Kosmic Reducers - RU300 EXEMPT, RU310 FAST DRY, RU311 MEDIUM DRY, RU312 SLOW DRY, RU313 HIGH TEMP - are the only reducers we recommend for use with
our Kosmic Kolor® Urethane Enamel system. Used in the base, Kandy and clear coats, our reducers allow for:
• excellent sprayability • good flow out and leveling
• fast staged release • retention of gloss when dry
NOTE: Even with over reduction, the paint retains its gloss. Other reducers may cause dulling. This is especially true when any amount of over reduction has been attempted to
even metallics or increase flow out. Choice of reducer is dependent on three factors:
1. size of object being painted
2. shop temperature and humidity
3. air movement within the spray booth
House of Kolor Reducer product data sheet in pdf format
| | |  Reducer RU312-4 by House of Kolor "Slow dry " quart size This slow dry reducer is recommended for use with our Kosmic Kolor® Base Coats, Shimrin® Base Coats, Kandys, and Klears. Has staged release for proper flow out, leveling, and gloss retention. Reducers for Kosmic Kolor® Urethane Enamel & Shimrin® Universal Bases:
Our Kosmic Reducers - RU300 EXEMPT, RU310 FAST DRY, RU311 MEDIUM DRY, RU312 SLOW DRY, RU313 HIGH TEMP - are the only reducers we recommend for use with
our Kosmic Kolor® Urethane Enamel system. Used in the base, Kandy and clear coats, our reducers allow for:
• excellent sprayability • good flow out and leveling
• fast staged release • retention of gloss when dry
NOTE: Even with over reduction, the paint retains its gloss. Other reducers may cause dulling. This is especially true when any amount of over reduction has been attempted to
even metallics or increase flow out. Choice of reducer is dependent on three factors:
1. size of object being painted
2. shop temperature and humidity
3. air movement within the spray booth
House of Kolor Reducer product data sheet in pdf format
| |
| |
